|
Application:
For machining and shaping of small workpieces, such as punches etc. For clamping of thin components type MH 204 is recommended which has an extra fine pole pitch.
Design:
Two or three magnetic clamping surfaces, pole pitch 4 mm, or 1.3 mm for type MH 204
Types MH 204S to MH 203S use SmCo5-magnets with extremely high holding forces for materials that are difficult to magnetize.
Nominal holding force:
80 N/cm2 for MH 201 to MH 204
180 N/cm2 for MH 201-S to MH 203-S
Magnetic Field height: 6 mm
Pole plate wearing limit:
14 mm for MH 201 and MH 202
6 mm for MH 203 and MH 204
|
| Type |
a |
b |
c |
max. angular
deviation |
Magnetice
faces |
 kg |
Down-
load |
| MH201 |
MH201S |
100 |
100 |
50 |
5´ |
1 Face 100 x 100 2 Faces 100 x 50 |
3.6 |
 |
| MH202 |
MH202S |
50 |
3 Faces 100 x 50 |
1.7 |
|
| MH203 |
MH203S |
25 |
25 |
2 Faces 100 x 25 |
0.5 |
|
| MH204 |
- |
|
|
