|
Design:
Cylindrical holding magnet, smooth without fitting tolerance.
Protected system
Max. application temperature: 450 °C
Magnetic material:
AlNiCo 500
Mounting possibility:
Screw
Note
1) When machining the holding surface, the maximum machining depth is 2 mm, otherwise the holding force will decrease significantly.
2) Also available with Neodymium magnets, see SAV 240.14. Also in stainless steel.
|
| Type |
a ±0.2 |
b |
c |
d |
Nom. force
in N |
 kg |
Down-
load |
| MH11 - 06 |
6 |
20 |
M 3 |
5 |
1.7 |
0.003 |
 |
| MH11 - 08 |
8 |
4 |
0.006 |
|
| MH11 - 10 |
10 |
M 4 |
7 |
8.5 |
0.010 |
|
| MH11 - 13 |
13 |
12.0 |
0.016 |
|
| MH11 - 16 |
16 |
5 |
20.0 |
0.025 |
|
| MH11 - 20 |
20 |
25 |
M 6 |
7 |
45.0 |
0.055 |
|
| MH11 - 25 |
25 |
35 |
9 |
100.0 |
0.135 |
|
| MH11 - 32 |
32 |
40 |
M 8 |
190.0 |
0.230 |
|
|
