|
Design:
Flat holding magnet without threaded bush.
Protected system, Surface galvanized.
Max. application temperature: 200 °C
Mounting possibility:
Press, glue
Magnetic material:
Hart ferrite (Oxis 380)
Note:
For all flat holding magnets, including Type MH 3 applies, that hair-cracks at the holding surface of the inserted magnetic material and a centre offset are technically not avoidable. This has no influence on the funktionality.
|
| Type |
a ±0.2 |
b ±0.2 |
Nom. force
in N |
 kg |
Down-
load |
| MH3 - 01 |
10 |
4.5 |
4 |
0.002 |
 |
| MH3 - 02 |
13 |
10 |
0.003 |
|
| MH3 - 03 |
16 |
20 |
0.005 |
|
| MH3 - 04 |
20 |
6.0 |
30 |
0.010 |
|
| MH3 - 05 |
25 |
7.0 |
40 |
0.018 |
|
| MH3 - 06 |
32 |
80 |
0.029 |
|
| MH3 - 07 |
40 |
8.0 |
110 |
0.055 |
|
| MH3 - 08 |
50 |
10.0 |
200 |
0.100 |
|
| MH3 - 09 |
63 |
14.0 |
320 |
0.230 |
|
| MH3 - 10 |
80 |
18.0 |
600 |
0.468 |
|
| MH3 - 11 |
100 |
22.0 |
900 |
0.915 |
|
| MH3 - 12 |
125 |
26.0 |
1300 |
1.680 |
|
| MH3 - 36 |
36 |
7.7 |
100 |
0.040 |
|
| MH3 - 47 |
47 |
9.0 |
180 |
0.084 |
|
| MH3 - 57 |
57 |
10.5 |
280 |
0.140 |
|
|
